Just another party by Keen Team
G925KKKU1AOE6/G925SKSU1AOE6 have this
bug fixed. Be cautious when installing OTA these days and FlashFire
might be your best shot of upgrading systems.
Current version: Beta 6 (HTC One (M9) SUPERSU VERSION! Check updated Usage section!)
Since Beta 5.2: Should be more "stable" on devices with more application installed, but I'm not 100% sure. 
If it doesn't work, roll back to beta 5.1
I'm getting too many queries about Note
4. Two things to clarify: 1) No device data needed to root Note 4, try
KingRoot 4.0. 2) Unless you have KNOX warranty bit tripped already,
there is no perm-root for Note 4 yet.
If you have decent bandwidth and experience with ROM files, please see this: Get To See
Big THANK YOU to all helped collecting ROMs. Now we have 85+2 ROM versions supported!
Everyone please do me a favor. If you
want a ROM (S6 or S6E) get supported, please confirm it is not yet
supported and post a reply in this thread like:
FPTAG fingerprint here
So I can quickly filter FP out of the replys by using search. Thanks.
Supported devices
Samsung Galaxy S6 with following ROM versions:
G9200ZCU1AOD5
G9200ZHU1AOD3
G9200ZHU1AOD9
G920R4TYU1AOD3
G920IDVU1AOD1
G920FXXU1AOCV
G920PVPU1AOCF
G920TUVU1AOCG
G920VVRU1AOC3
G920FXXU1AOBN
G920FXXU1AODG
G9209KEU1AOCI
G9209KEU1AODA
G9208ZMU1AOD5
G9208ZMU1AOCI
G920FXXU1AOD9
G920AUCU1AOCE
G920FXXU1AODE
G9200ZCU1AOD9
G920W8VLU1AOCG
G920FXXU1AOD4
G920R4TYU1AOCB
***new*** Use Download Data!
G920FXXU1AOCY
G920IDVU1AOC4
G920FXXU1AODI
G9209KEU1AOD5
G920IDVU1AOBQ
G9208ZTU1AOD9
G920FXXU1AOE3
G920IDVU1AOE3
G920FXXU1AOD8
G920FXXU1AOE4
G920AUCU1AOE2
G920T1UVU1AOCH
G9208ZTU1AOCI
G920IDVU1AOC6
G920IDVU1AOD3
G920FXXU1AOCZ
G920AZTUU1AOD1
G9200ZHU1AOE4
G9200ZCU1AOE4
G920KKKU1AODC
G920IDVU1AOE4
G920LKLU1AODC
G920SKSU1AODC
G920IDVU1BOE2
G9208ZTU1AOE4
G920PVPU1AOE2
Samsung Galaxy S6 Edge with following ROM versions:
G9250ZCU1AODC
G925VVRU1AOC3
G925FXXU1AOD9
G925PVPU1AOCF
G925FXXU1AOCV
G925AUCU1AOCE
G925TUVU1AOCG
G925W8VLU1AOCG
G925IDVU1AOD1
G925SKSU1AOD5
***new*** Use Download Data!
G925FXXU1AOD4
G925R4TYU1AOD3
G925FXXU1AODG
G925FXXU1AOCZ
G925IDVU1AOD3
G925LKLU1AOD8
G925SKSU1AOD8
G925FXXU1AOE3
G925PVPU1AOE2
G925FXXU1AOD8
G9250ZTU1AODC
G925FXXU1AOE4
G925AUCU1AOE2
G925TUVU1COE6
G925FXXU1AOCY
G9250ZTU1AOE4 (5/11 kernel, seems not fixed yet, please test)
G925R4TYU1AOE2
SCV31KDU1AOCP (Japan version of S6E?)
G9250ZCU1AOCH
G9250ZCU1AOE4
G925IDVU1AOE4
G925IDVU1BOE1
G925LKLU1AODC
G925IDVU1AOE3
G925IDVU1AOE2
G925KKKU1AODC
G925SKSU1AODC
HTC One (M9) -- EXPERIMENTAL, UNLOCKED BL REQUIRED
htc/himauhl_htccn_chs_2/htc_himauhl:5.0.2/LRX22G/516731.9:user/release-keys
Verizon 1.33.605 (?)
New ROM and device support are coming~~
If your ROM version is not listed here, please check if any ROM with the
same variant is already supported. If the supported one is newer, I
suggest go and grab it instead of waiting.
Known Issues:
None
Todo:
Coming next release: (will come after SuperSU version)
TBD
In queue:
Check the workshop thread:
http://forum.xda-developers.com/gala...hread-t3104639 but
DO NOT REPLY UNLESS YOU ARE WORKING ON ROMS. Thank you for keeping that post clean!
Usage
OK, since manual switch is too complex and there are some compatibility issue of Kinguser, I'm making a SuperSU version now.
Note that due to the natural that SuperSU su doesn't ask for permission
when SuperSU apk is missing, root will only happen when SuperSU apk has
been installed. Read instrucitons below CAREFULLY!
0. Read Q&A section and BACKUP your data.
1. If you already have Kinguser installed please:
a. Open Kinguser, go to Settings -> Root authorization setting -> Remove Root permission. Click to remove root permission
b. Uninstall Kinguser
2. Download pingpongroot_<ver>.apk. Install & open it.
3. It will automatically install SuperSU 2.46 for you. Follow the
instructions on screen. You may need to enable unknown source for this
step.
a. Once install is finished, click “Open" and run it
once to "activate" it. It will prompt an error message (unless you
already rooted) and exit automatically, bring you back to PingPong root.
4.
Click "Download Data" button to update device data if you have Internet connection.
5. Open it and click "Get Root!" button
6. If prompted for app permissions, allow them and continue. If it reboots, just retry.
7. Once finished, please make sure to reboot.
8. You can uninstall PingPong root app once finished.
Credits
Vulnerability: memeda, wushi
Original idea of exploit: memeda
Exploit: idl3r, Qoobee
Special thanks to:
Kingroot team for help testing and great root manager
Q&A
Q: It just keeps rebooting, what can I do?
A: The exploit may panic the kernel and reboot your device. If the data
is off, same could happen as well. When issue happens, try these:
a. Clean up background process before running root.
b. Turn on airplane mode after clicking "Download Data".
c. Backup your data and run factory reset.
d. Definitely avoid doing anything else when "wait!!!" appears.
If these doesn't help after 5 retries, there could be some issue, please collect the information in
/proc/last_kmsg and send it to me.
Note: User reporting installing My Knox or enable
other Knox feature (like enterprise provision or KNOX active protection)
may cause reboot loop. Be cautious!
Q: My ROM is not yet supported?
A: Since I have limited bandwidth to download ROMs, I have to prioritize
ROM requests and focusing on new variants/models first. And currently
recruiting volunteers to help download/shrink ROMs.
If you see your ROM FP is not listed, but a very similar one (may be
just the last digit or character is different) exists, please see if you
can flash that version of ROM. I'm sure you can find someone helping
you in corresponding forum.
Q: Will Samsung Pay/My Knox work?
A: To be honest I can't tell for sure. Indeed this root does not trip
warranty bit. But it still leaves SU files, which is inevitable, on
system partitions. And a lot of root features actually make change to
system partition, so let's say it can be detected. If Samsung makes the
decision that there will be no certain feature for presence of a su
file, then there will be no fun. IMHO this is very bad idea since even
Apple doesn't disable anything on jailbreak devices. Let's see what will
be the outcome. This makes sense to enterprise uses but for consumers
at least a choice should be given.
Q: Note4/Z3/Old Samsung/etc?
A: We also wrote the rooting engine in KingRoot 4.0 for generic 32-bit
devices. Give it a try. Note that for some devices like Note4, only temp
root is achievable.
Q: Why "PingPong" root?
A: Because the vulnerability affects ping socket and we are Chinese
Q: What's the current status of this tool?
A: Beta. We've thoroughly tested it on ROMs for G9200, but not other variants. You are the 1st batch of beta testers!
Q: Is my device supported?
A: You can check the version of your ROM in "About this phone" page. It shall read LRXxxx following by the ROM version.
This tool checks your ROM version as well. If you read "Your device data
is still not supported." after clicking "Get Root!", your device data
has not been collected yet. Please reply with your ROM version plus
keyword "
FPTAG" in this thread.
Q: Will this root trip KNOX warranty bit or disable OTA?
A: No, it won't trip KNOX warranty bit and YES, it will disable OTA. It
doesn't require odin to flash in a custom recovery, so the warranty bit
will remain intact.
Q: I'd like switching to SuperSU, what shall I do?
A: Kinguser does not have a "swtich" function. Follow these
steps to do so manually: (if you are not familiar with adb, see this
version:
http://forum.xda-developers.com/show...&postcount=269)
1. Download supersu.7z and extract it. You will get the files needed to install Supersu.
2. Using adb to push su and busybox (if not installed) to /data/local/tmp.
Code:
adb push su /data/local/tmp
adb push busybox /data/local/tmp
3. Start a su session and run the following commands:
Code:
mount -o remount,rw /system
cat /data/local/tmp/su >/system/xbin/daemonsu && chmod 0755 /system/xbin/daemonsu
cat /data/local/tmp/busybox >/system/bin/busybox && chmod 0755 /system/bin/busybox
daemonsu -d &
Then keep the session running.
4. Open Kinguser, go to Settings -> Root authorization setting ->
Remove Root permission. Click to remove root permission. Your su session
should be still running.
5. Uninstall Kinguser app.
6. Go back to the su session and run following commands to replace su and cleanup:
Code:
cat /data/local/tmp/su >/system/xbin/su && chmod 0755 /system/xbin/su
busybox chattr -ia /system/bin/ddexe
busybox chattr -ia /system/bin/ddexe_real
cat /system/bin/ddexe_real >/system/bin/ddexe
busybox chattr -ia /system/xbin/ku.sud
rm /system/xbin/ku.sud
rm /system/xbin/pidof
rm /system/xbin/supolicy
7. Install Supersu apk
8. Open Supersu apk to update files.
9. Reboot.
Q: S6 Edge/G Flex 2/M9/other arm64 devices?
A: We will look into them soon
S6 Edge: Done
M9: WIP
G Flex 2/others: pending
Q: I need a video to guide me through
A: Check out this one:
https://youtu.be/_Ezh7Oi-jyM
(
Note: these are for earlier version)
https://www.youtube.com/watch?v=gNdWX31Sqd8
and this one:
http://youtu.be/eAQ4WBg9xj0
To all sent me PM: I'm sorry that
the reply could be delayed. Currently we are busy working on supporting
of new ROMs and fixing bugs. To all those providing useful
info/suggestion, thanks a ton!
![[IMG]](http://s18.postimg.org/h4wjhjyqh/attachment_php.png)